HP StorageWorks XP Performance Advisor Software v4.6 Command-line User Interface Reference Guide (T1789-96095, June 2010)

NOTE:
XP Performance Advisor supports multiple data collection. For the exportdb command to be
successful, ensure that the RAID Groups are part of a single schedule only.
Example 1. Schedule 1
Components selected:
RAID Group: All the available RAID Groups
Frequency of collection: 1 min
Example 2. Schedule 2
Components selected:
nl
DKC
Port: All the available ports.
Frequency of collection: 30 mins (for all the above components)
Switches
Specify the delimiter for delimited output.
There is no space between -d and the delimiter character.
–d<delim>
Specify the labeled and delimited output data.–L
Displays data in a readable format.–hr
Specify the address of the management station in the form of
<http://path.to.managementstation/>.
–ms <URL>
Specify a user name and password pair in the format user name:password.
–auth <user:pass-
wd>
Required. Specify the array serial number.– dkc <serial #>
Required. Specify the start time in the format mm.dd.yyyy hh:mm:ss.
–st <mm.dd.yyyy
hh:mm:ss>
Required. Specify the end time in the format mm.dd.yyyy hh:mm:ss.
–et <mm.dd.yyyy
hh:mm:ss>
Specify the filename to send the data that is retrieved.
(If the file exists, the data is appended.)
–file <filename>
CLUI commands48