HP StorageWorks XP Performance Advisor Software v4.6 Command-line User Interface Reference Guide (T1789-96095, June 2010)

Display column headers with delimited data.–L

Displays data in a human readable format.–hr

Prints this usage statement.–?

NOTE:

The -st and –et options are supported with the –jid option only.

Examples

jnl -hr -dkc 10001

jnl -hr -dkc 10001 -jid 0

jnl -hr -dkc 10001 -jid 0 -st 4.5.2007 03:00:00 -et 4.5.2007 03:10:00

-resp

EXPORTDB

Syntax

exportdb [-d<delim>] [-L] [-hr] [-ms <URL>] [-auth <user:passwd>] [-st

<mm.dd.yyyy hh:mm:ss>] [-et <mm.dd.yyyy hh:mm:ss>] [-file <filename>]

-dkc <serial #> -dver <XXXXXX> [-?]

Description

Use the ExportDB command to export data, for charting or graphing, and including the Ext-LUN

information to a data visualization program, such as Microsoft Excel. The output of the ExportDB

command for the dkc performance data contains the maximum configuration of an XP12000 array,

even though the XP10000 array has a maximum of 4 CHIPs and 2 ACPs. This is because there are

16 CHIPs and 8 ACPs columns. However, if the column is not applicable for XP10000, it displays

the text "Invalid" as a column heading. For mix Printed Circuit Boards (PCBs), the column displays

the label "Invalid Mp" as a column heading for MPs 4 to 7.

HP StorageWorks XP Performance Advisor Software Command-Line User Interface Reference

Guide 47