HP StorageWorks XP Performance Advisor Software v4.6 Command-line User Interface Reference Guide (T1789-96095, June 2010)

NOTE:
The -st and –et options are supported with the –pid option only.
Examples
snapshot dkc <array sn no> -hr
snapshot dkc <array sn no> -L
snapshot dkc <array sn no> -pid 1
snapshot dkc <array sn no> -pid 1 st 02.23.2006 16:00:00 et 02.23.2006
16:15:00
JNL
Syntax
jnl -dkc <serial #> [-jid <journal pool id>] [-auth <user:passwd>] [-ms
<URL>] [-L] [-resp] [-d <char>] [-hr] [-?] [-pf <password file>] [-st
<MM.DD.YYYY hh:mm:ss>] [-et <MM.DD.YYYY hh:mm:ss>]
Description
Enables you to obtain Continuous Access Journal related information. This command provides the
following Continuous Access Journal information:
JID — Displays the journal group ID
nl
MU — Displays the mirror descriptions on journal group
nl
CTG —Displays the CT group ID for the journal group
nl
JNLS —Displays the following status in the journal group
Primary Journal:
Constant valueStatus valueString
0Journal pool is not used in a journal group.JSTAT_SMPL
1This means P(S)vol Journal is Normal Normal.JSTAT_PJNN
2This means P(S)vol Journal is Suspend Normal.JSTAT_PJSN
3This means P(S)vol Journal is Normal Full.JSTAT_PJNF
4This means P(S)vol Journal is Suspend Full.JSTAT_PJSF
5
This means P(S)vol Journal is Suspend Error including link
failure.
JSTAT_PJSE
Secondary Journal:
Constant valueStatus valueString
HP StorageWorks XP Performance Advisor Software Command-Line User Interface Reference
Guide 45