HP StorageWorks XP Performance Advisor Software v4.6 Command-line User Interface Reference Guide (T1789-96095, June 2010)

NOTE:
The -st and –et options are supported with the –pid option only. The array serial number and
–dkc are required elements.
Examples
thp dkc <array sn no> -hr
thp -dkc 10090 -pid 1 -hr
aouthp dkc <array sn no> -L
aouthp dkc <array sn no> -pid 1
aouthp dkc <array sn no> -pid 1 st 02.23.2006 16:00:00 et 02.23.2006
16:15:00
SNAPSHOT
Syntax
snapshot -dkc <serial #> [-pid <snapshot pool id>] [-auth <user:passwd>]
[-ms <URL>] [-L] [-d<char>] [-hr] [-?] [-pf <password file>]
Description
Enables you to obtain Snapshot pool related information. This command provides the Snapshot pool
occupancy value in percentage.
Switches
Required. Specify the array serial number.–dkc <serial #>
Specify the address of a management station in the format <http://path.to.management-
station/>.
–ms <URL>
Specify a user name and password pair in the format user name:password.
–auth <user:pass-
wd>
Can be used in place of –auth.
NOTE:
The password file must be created using the encrypt command only.
–pf <password
file>
Specify the delimiter for delimited display.–d
Displays data in a readable format.–hr
Prints the usage statement.–?
CLUI commands44