HP StorageWorks XP Performance Advisor Software v4.6 Command-line User Interface Reference Guide (T1789-96095, June 2010)

The format to list the average and maximum values for the samples in the time period specified by
the –st and –et values is as follows:
aggregate [-a] [-st<MM.DD.YYYY hh:mm:ss>] [-et<MM.DD.YYYY hh:mm:ss>]
Description
Displays the performance data of a given metric for a specified time interval. Based on the metric
used, information can be requested for an array, RAID Group, or LDEV.
Required. Specify a CSV list of DKCs, metrics, and items on the DKC for which you
want the aggregated data.
It uses the form Metric:dkc serial:itemlist, or Metric:User Defined Group.
Item list: A list of LDEVs, ports, ACP Pairs, RAID Groups, or ranges of each
(except for RAID Groups) separated by a "+".
Ranges are in the form lowitem-highitem separated by a "-".
Items must be entered in their string form (case insensitive, no "-" within the port).
For example:
ldev_io_total:20031:1:f4-1:f9+1:fc
port_io_max:10033:CL1E
The RAID Groups format is: <array_sl_no>:<raid group>
For example: raidgrp_io_total:10278:1-1
–items<item list>
Specify the lower bound on time.
–st <MM.DD.YYYY
hh:mm:ss>
Specify the upper bound on time.
–et <MM.DD.YYYY
hh:mm:ss>
Specify the address of a management station in the format <http://path.to.manage-
mentstation/>.
–ms <URL>
Specify a user name and password pair in the form user name:password.–auth <user:pass>
Specify the labeled and the delimited output data.–L
Displays data in a readable format.–hr
The output average and maximum values for the returned samples.–a
Specify the delimiter for the delimited output.–d<delim>
Prints all of the supported metrics.–display
Prints the usage statement.–?
For a RAIDGRP_UTIL_OVRALL metric, if you want to view the average and maximum values on a
monthly, weekly, daily, or hourly basis, following are the options that can be used with -a in the
Aggregate command (instead of the -st and -et options):
SyntaxCommand
aggregate -a -items RAIDGRP_UTIL_OVRALL:<DKC>:<RAID_GROUP> —m
yyyy mm
Monthly
CLUI commands36