HP StorageWorks XP Performance Advisor Software v4.6 Command-line User Interface Reference Guide (T1789-96095, June 2010)

Required. Purges data from the management station.–purge
Required. Sets the level of log messages to store. It is followed by a number between 1
and 10.
–loglvl
Required. Retrieves a list of current database settings.–list
If used with -purge, indicates the day previous to the current day at which to begin
purging data. Cannot be used with -loglvl or -list.
–days
Specify the array serial number.
Must not be used with -loglvl or -list.
–dkc <serial num-
ber>
Specify the time and date of the last stored data collection. Cannot be used with -loglvl
or -list.
–et <mm.dd.yyyy
hh:mm:ss>
Specify the address of a management station in the format <http://path.to.management-
station/>.
–ms <URL>
Specify a user name and password pair in the format user name:password.
–auth <user:pass-
wd>
Can be used in place of –auth.
NOTE:
The password file must be created using the encrypt command only.
–pf
Specify the delimiter for delimited display.–d <char>
Displays column headers with the delimiter.–L
Displays data in a readable format.–hr
Prints the usage statement.–?
Examples
dbconfig -list –hr
dbconfig -list -L
dbconfig –list
AGGREGATE
Syntax
aggregate [-items <item list>] [-L] [-hr] [-a] [-st<MM.DD.YYYY hh:mm:ss>]
[-et<MM.DD.YYYY hh:mm:ss>] [-?]
nl
The format to list items for the XP Thin Provisioning metrics for the aggregate command is:
<array_sl_no>:<THP Pool ID>
The format to list items for the XP Snapshot metrics for the aggregate command is:
<array_sl_no>:<Snapshot Pool ID>
HP StorageWorks XP Performance Advisor Software Command-Line User Interface Reference
Guide 35