HP StorageWorks XP Performance Advisor Software v4.6 Command-line User Interface Reference Guide (T1789-96095, June 2010)

Can be used in place of –auth.
NOTE:
The password file must be created using the encrypt command only.
–pf <password_file>
Displays the usage message; no parsing or sending is performed.–?
NOTE:
• Only one input source is accepted in one invocation.
• Output rows to the file or screen have fields separated by commas.
• Either -auth or -pf is accepted, but not both. The password file must be created using only the
encrypt command.
• There is no output to the file or to the screen unless requested.
• The commands are not case-sensitive.
• The order of command options does not matter.
• If command options are not provided, the streamed-in input is checked.
• For validity with no output presented or sent to the management station.
RAIDGRP
Syntax
raidgrp -dkc <serial #> -rg <raid group> [-auth <user:passwd>] [-ms
<URL>][-L] [-d<char>] [-hr] [-?] [-pf <password file>]
Description
Displays information about RAID Groups of the array such as the RAID level, ACP pair, control unit,
and disk mechanics information.
Switches
Required. Specify the array serial number.–dkc <serial #>
Required. Specify the RAID Group for which you want output displayed.–rg <raid group>
Specify the address of a management station in the format <http://path.to.management-
station/>.
–ms <URL>
Specify a user name and password pair in the format user name:password.
–auth <user:pass-
wd>
Can be used in place of –auth.
NOTE:
The password file must be created using the encrypt command only.
–pf <password
file>
Specify the delimiter for the delimited output.–d <char>
HP StorageWorks XP Performance Advisor Software Command-Line User Interface Reference
Guide 31