HP StorageWorks XP Performance Advisor Software v4.6 Command-line User Interface Reference Guide (T1789-96095, June 2010)

Can be used in place of -auth.
NOTE:
The password file must be created using only the encrypt command.
–pf <password file>
Specify the first threshold level.–th1 <threshold>
Specify the second threshold level.–th2 <threshold>
Specify the third threshold level.–th3 <threshold>
Specify a csv list of email destinations.–email <Email List>
Specify a csv list of SNMP destinations.–snmp <SNMP List>
Indicates the alarm is enabled.–e
Specify the delimiter for delimited output. Used with -list and -details.
–d<delim>
Displays data in a readable format. Used with -list and -details.
–hr
Prints the usage statement.–?
NOTE:
The following metrics are applicable to mainframe volumes only:
CFW_TOTAL LDEV IO type
CFW_READ LDEV IO type
CFW_READ_CACHE LDEV IO type
CFW_WRITE LDEV IO type
CFW_WRITE_CACHE LDEV IO type
DFW_COUNT LDEV IO type
DFW_NRML_COUNT LDEV IO type
DFW_SEQ_ACCESS LDEV IO type
DFW_WRITE_HITS LDEV IO type
DFW_SA_WRITE_HITS LDEV IO type
The XP Thin Provisioning (THP) Pool Occupancy, Snapshot Pool Occupancy, and Continuous Access
Journal metric category for an XP24000 array can be determined using the following commands:
configalarm -dkc <array sn no> -mval <THP poolid> -metric
THP_POOL_OCCUPANCY
configalarm -dkc <array sn no> -mval <Snapshot poolid> -metric SNAPSHOT_
POOL_OCCUPANCY
configalarm -dkc <array sn no> -mval <Snapshot poolid> -metric
JOURNAL_FILE_USAGE_UTIL
CLUI commands28