HP StorageWorks XP Performance Advisor Software v4.6 Command-line User Interface Reference Guide (T1789-96095, June 2010)

Specifies the ACP pair for which you want the output displayed.
The word "all" can be used to indicate all hosts.
Not adding this switch has the same effect.
–acp <acpPair>
Prints the usage statement.–?
Specifies the Logical Unit Size Expansion (LUSE) master ID.-luse <ldev ID>
Specifies the User Group Name. Can be used interchangeably with -dkc or -ha.
-ugrp <user group>
Examples
lunh -ha xpslk.user.server.com –hr
lunh -ha xpslk.user.server.com -L
lunh -ha hpbs1428.user.server.com -hr -dver 010600
lunh -ha hpbs1428.user.server.com -L -dver 010600
lunh -ha angus -dkc 10 001 –hr
LUND
Syntax
lund [-d<delim>] [-L] [-hr] [-ms <URL>] [-auth <user:passwd>] -dkc
<user:passwd>] -dkc <serial #>
[-mr <maxRecords>] [-rg <raidGroup>] [-chp <chpPort>] [-acp <acpPair>]
[-ha <host ID>] [-dver<xxxxxx>] [-?] ugrp <user group>
Description
Displays the logical unit disk controller Snapshot data such as LUN ID, device file, emulation, Snapshot
ID, CHIP port ID, and ACP pair ID. The output of this command is sorted by the host ID.
HP StorageWorks XP Performance Advisor Software Command-Line User Interface Reference
Guide 19