HP StorageWorks XP Performance Advisor Software v4.6 Command-line User Interface Reference Guide (T1789-96095, June 2010)

Switches
Required. Specifies the array serial number.–dkc <serial#>
Specifies the delimiter for delimited output. There is no space between -d and the de-
limiter character.
–d<delim>
Specifies the labeled and delimited output data.–L
Displays data in a readable format.–hr
Specifies the address of a management station in the format <http://
path.to.managementstation/>.
–ms <URL>
Specifies a user name and password pair in the format user name:password.
–-auth <user:pass-
wd>
Specifies the start time in the format mm.dd.yyyy hh:mm:ss.—st <start time>
Specifies the end time in the format mm.dd.yyyy hh:mm:ss.–et <end time>
Prints the usage statement.–?
NOTE:
If no start and end time is specified, only the most recent 10 records are retrieved from the management
station.
Examples
dkch -dkc 10055 -hr
dkch -L -dkc 30143
dkch -dkc 10055 —L
LUNH
Syntax
lunh [-d<delim>] [-L] [-hr] [-ms <URL>] [-auth <user:passwd>] -ha <host
ID>[-mr <maxRecords>] [-rg <raidGroup>] [-chp <chpPort>] [-acp <acpPair>]
[-dkc <serial #>] [-dver <xxxxxx>] [-?] [-luse] [-ugrp]
Description
Displays logical unit snapshot data, such as LUN ID, device file, emulation, Snapshot ID, CHIP port
ID, and ACP pair ID. The output of this command is sorted by the array ID.
HP StorageWorks XP Performance Advisor Software Command-Line User Interface Reference
Guide 17