HP StorageWorks XP Performance Advisor Software v4.6 Command-line User Interface Reference Guide (T1789-96095, June 2010)

DKCS
Syntax
dkcs [-d<delim>] [-L] [-hr] [-ms <URL>] [-auth <user:passwd>] -dkc <serial
#> [-?]
Description
Displays the Client-Host Interface Processor (CHIP) and Array Control Processor (ACP) utilization data
for a given array.
Switches
Required. Specifies the array serial number.–dkc <serial #>
Specifies the delimiter for delimited output.
There is no space between -d and the delimiter character.
–d<delim>
Specifies the labeled and delimited output data.–L
Displays data in a readable format.–hr
Specifies the address of a management station in the format: <http://
path.to.managementstation/>.
–ms <URL>
Specifies a user name and password pair in the format: username:password.–auth <user:passwd>
Prints the usage statement.–?
Examples
dkcs -hr -dkc 30143
dkcs -L -dkc 30143
dkcs -dkc 30143
DKCH
Syntax
dkch [-d<delim>] [-L] [-hr] [-ms<URL>] [-auth <user:passwd>] -dkc <serial
#> [-st <start time> -et <end time>] [-?]
Description
Displays the CHIP and ACP utilization history of a given array for a given time range.
CLUI commands16