HP StorageWorks Network Storage Router M2402 V1.0 User Guide (March 2004)

Visual Manager User Interface
90 Network Storage Router M2402 User Guide
■ Override Settings: To override the settings of a SCSI target, select a Target
ID icon with the appropriate Target ID number.
After a specific Target is selected, the SCSI Override sub-screen is displayed
and is used to enter the Override settings (see Figure 48).
Caution: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change and
verify the desired setting. HP recommends backing up the router configuration
to an external file before making changes to this setting.
Figure 48: SCSI Device Override screen
■ SCSI bus override settings:
— CDB Length Override enables or disables the override of default CDB
lengths.
— CDB Group 6 Length Default (default: 0) can be set to 0, 6, 10, or 12.
— CDB Group 7 Length Default (default: 0) can be set to 0, 6, 10, or 12.
— Wide Negotiation enables or disables negotiation on a wide SCSI bus.
— Synchronous Negotiation enables or disables synchronous negotiation
on the SCSI bus.
— Synchronous Parameter Override enables or disables parameters for
synchronous negotiation.