HP StorageWorks Network Storage Router M2402 V1.0 User Guide (March 2004)

Visual Manager User Interface
78 Network Storage Router M2402 User Guide
Power Supply Configuration
The Power Supply screen is used to indicate the number of power supplies
installed in the router.
The router is shipped with one installed power supply, but a redundant power
supply can be purchased.
If two power supplies are installed in the router, use this screen to indicate the
change (see Figure 38).
When set to 1, the router suppresses event notifications of the second power
supply.
Note: If set to ‘1’ in a two-power-supply configuration, the router cannot issue an
event notification if one of the power supplies fails.
Note: If there are two power supplies, and one of the two fails, this option does not
inhibit the router from using the second power supply.
Figure 38: Power supply screen