HP StorageWorks Network Storage Router M2402 V1.0 User Guide (March 2004)

Installation
51Network Storage Router M2402 User Guide
Serial Port Connections
The DB-9 connector provides a serial port that is compliant with the EIA 562
standard and is RS-232 signaling-level compatible. The serial connection can be
used to configure the unit, to monitor its diagnostic status, or to update the router
firmware. Figure 26 is an illustration of the serial port location on the front of the
router.
Figure 26: Serial port
Item Settings
Baud Rate Autobaud, 9600, 19200, 38400, 57600, or 115200
HP recommends setting the baud rate to 115200.
Data Bits 8
Stop Bits 1
Parity None
Flow Control None or XON/XOF