HP StorageWorks Network Storage Router M2402 V1.0 User Guide (March 2004)

Installation
45Network Storage Router M2402 User Guide
For convenience in configuring ports, important information can be found on a
label located on the underside of the router (see Figure 21).
Figure 21: WWN/MAC ID label
Fibre Channel Connections
In typical installations, the router may be connected to:
■ Arbitrated Loop (AL) – the router can be directly attached to the FC host
adapter in a point-to-point configuration.
■ Private loop (hub)
■ Public loop (hub that is also connected to a switch)
■ Fabric environment (switch)
Note: Before connecting the router to other Fibre Channel devices, it is important to
understand the configuration requirements of the environment to which it will be
connected. Failure to correctly configure a Fibre Channel device may impair the
operation of the storage network to which it is attached.
WWPN: 100000E00Y00N000
ENET MAC ID: 00:E0:02:00:00:XY
WWNN: 100000E00200N000