HP StorageWorks Network Storage Router M2402 V1.0 User Guide (March 2004)

Installation

38 Network Storage Router M2402 User Guide

Figure 14: Separating the inner and outer rails

d. Repeat Step 3 to separate the other set of rails.

4. Attach the front-end and back-end of each outer-rail assembly to the rack.

a. Determine the location in the rack for the router.

Note: The size of the router and its rail assembly is 1U.

b. Align the three screw-holes on the front-end of the outer-rail assembly

with the equally spaced holes on the front of the rack. All three holes must

be aligned exactly. If the holes do not exactly match up, the outer-rail

assembly is not positioned correctly on the rack (see Figure 15).

Figure 15: Aligning the bracket face with the rack

Circular Grasping Hole

View From

Opposite Side

Spring Latch

Front of Inner

Rail

Front of Outer

Rail

Extension

Bracket