HP StorageWorks Network Storage Router M2402 V1.0 User Guide (March 2004)

237Network Storage Router M2402 User Guide
Index
Index
Index
A
Active Fabric configuration
Serial/Telnet UI 155
Visual Manager UI 59
addressing, defined 215
AL_PA, addressing methods 38
aligning the bracket face with the rack,
illustrated 19
attaching inner rails to the router, illustrated 20
attaching the bezel to the rack, illustrated 21
audience xii
authorized reseller, HP xvii
auto-assigned addressing
described 219
auto-assigned maps, defined 41
autobaud, setup 31
B
backing up the configuration, FTP UI 179
backup and restore, LAN-free, illustrated 12
backside view of router, illustrated 2
baud rate configuration
Serial/Telnet UI 113
Visual Manager UI 53
beacon mode configuration
Serial/Telnet UI 171
Visual Manager UI 92
bezel, attaching to the rack, illustrated 21
blank I/O module
installing 193
removing 192
buffered tape writes
Fibre Channel
Serial/Telnet UI 123
Visual Manager UI 71
overview of 41
SCSI
Serial/Telnet UI 128
Visual Manager UI 77
bus reset on boot
overview of 37
Serial/Telnet UI 126
Visual Manager UI 76
C
Center for Devices and Radiological Health See
CDRH
clock configuration
Serial/Telnet UI 154
Visual Manager UI 62
configuration settings
backing up 179
common 36
restoring 180
configurations, Fibre Channel to SCSI,
illustrated 9
connections
Ethernet 29
Fibre Channel 24
power cord 22
SCSI 27
serial 30
controller LUN commands
copy manager commands, listed 211
extended copy 211