HP StorageWorks Network Storage Router M2402 V1.0 User Guide (March 2004)

Controller LUN Commands
217Network Storage Router M2402 User Guide
Version SPC-2
The Extended Copy command supports the following Target descriptor codes
listed in T10 document 1236-D (Page 48, Table 16):
Extended Copy command also supports the following Initiator descriptor
codes listed in T10 document 1236-D (Page 48, Table 16):
Table 13: Extended Copy Initiator descriptor codes, version
99-143r1
Item Value
Block to Stream 0x00
Stream to Block 0x01
Block to Block 0x02
Inline to Stream 0x04
Stream to Discard 0x06
Verify Target 0x07
Space Operation 0x11
Locate Operation 0x12
Table 14: Extended Copy Target descriptor codes, version SPC2
Item Value
Fibre Channel World Wide Name
Target Descriptor
0xE0
Fibre Channel N_Port Target Descriptor 0xE1
Table 15: Extended Copy Initiator codes, version SPC2
Item Value
Block to Stream 0x00
Stream to Block 0x01
Block to Stream 0x02
Stream to Stream 0x03
Inline Data to Stream 0x04
Stream to Discard 0x06