HP StorageWorks Network Storage Router M2402 V1.0 User Guide (March 2004)

Hardware Module Replacement

196 Network Storage Router M2402 User Guide

Installing an I/O Module or Blank Module

To install an I/O module:

1. If an I/O module or blank module has not been removed, see the preceding

procedure, “Removing an I/O Module or Blank Module” When completed,

proceed to Step 2.

2. Remove power to the router.

3. Remove the new I/O module from its shipping container and remove all

packing material from around the module.

Caution: Place the module onto a smooth surface and avoid exposure to

direct sunlight, liquids or vapors, excessive heat, or risk of accidental dropping

or other damage.

Figure 118 illustrates a SCSI module and Figure 119 illustrates a Fibre Channel

module.

Figure 118: Thumbscrews and handle on a SCSI module