HP StorageWorks Network Storage Router M2402 V1.0 User Guide (March 2004)

Hardware Module Replacement
194 Network Storage Router M2402 User Guide
Removing and Installing an I/O Module or Blank I/O Module
The I/O modules are not hot-swappable and must be replaced while the router is
powered down.
Caution: To prevent static shock, which can damage electrical equipment, use
industry accepted handling practices when servicing the router and its
components. See Appendix E, “Electrostatic Discharge,” for more information.
Figure 116: Removing and installing I/O modules
Caution: I/O modules must be installed or removed when the router is
powered off. Installing I/O modules while power is applied may result in
damage to the module or system. Failure to do so may void the product
warranty.
Item Description
1 Removing an I/O module blank
2 Installing a SCSI module
1
2