HP StorageWorks Network Storage Router M2402 V1.0 User Guide (March 2004)

Serial/Telnet User Interface
148 Network Storage Router M2402 User Guide
Adding a Map Entry to a SCSI Map
To add a new entry to a SCSI map:
1. In the Edit Map Entries screen, select Add (A) (see Figure 84).
Figure 84: Adding an Entry to a SCSI map
2. Enter a Target/LUN ID combination.
If the selected Target/LUN is already present in the map, a prompt is
displayed that asks to either confirm the override or enter different address
information. A device selection list is automatically generated.
Note: Devices cannot be mapped to their native port.
Figure 85: Device List generated for a SCSI port