HP StorageWorks Network Storage Router M2402 V1.0 User Guide (March 2004)

Serial/Telnet User Interface
124 Network Storage Router M2402 User Guide
Baud Rate Configuration
In the Configuration Menu, select Baud Rate Configuration (1) to change the
baud rate used on the serial port (see Figure 69).
Figure 69: Baud Rate Configuration menu
To change the baud rate enter the number (1 through 5) that represents the desired
rate.
Note: The asterisk (*) symbol indicates the current setting for the baud rate.
Note: If the Autobaud feature is being used, it is not necessary to set a baud rate.