NAS Executor e7000 v2 - Release Notes

Release Notes
StorageWorks by Compaq NAS Exectutor E7000 Release Notes 15
COMPAQ CONFIDENTIAL
Writer: Doug Warren File Name: 261259-002.doc
Codename: Eusebio Part Number: 261259-002 Last Saved On: 4/29/02 9:42 AM
10. Click View->Device Identification->WINNT-
>Bus,Target,LUN.
This view displays the target-bus-LUN for the LUNs. The last
number, the LUN, represents the unit number on the SAN. In the
screen below, the LUN is D1.
SAN Connection Process
The process of configuring the StorageWorks NAS E7000 with
the correct software for a particular SAN configuration is
accomplished via a WEB interface and an automated installation
process. This automated process and interface do not yet account
for updates or changes to the SAN configuration after the initial
setup.
IMPORTANT: If it becomes necessary to make updates, corrections, or
changes of any type to the SAN configurations originally specified in the
SAN Connect process of the WEB interface, the existing SAN drivers and
support software must be manually uninstalled before running the SAN
Connect process again.