hp StorageWorks NAS e7000 v2 Maintenance and Service Guide

Connectors, LEDs, and Switches
97NAS e7000 v2 Maintenance and Service Guide
Table 22: Hot-Plug SCSI Hard Drive LED Combinations
Activity
LED
Online
LED
Fault
LED
Status
On Off Off Do not remove the drive. Removing a drive during this
process will cause data loss.
The drive is being accessed and is not configured as part
of an array.
On Flashing Off Do not remove the drive. Removing a drive during this
process will cause data loss.
The drive is rebuilding or undergoing capacity expansion.
Flashing Flashing Flashing Do not remove the drive. Removing a drive during this
process will cause data loss.
The drive is part of an array being selected by the Array
Configuration Utility.
-Or-
The Options ROMPaq is upgrading the drive.
Off Off Off OK to replace the drive online if a predictive failure alert
is received, and the drive is attached to an array
controller.
The drive is not configured as part of an array.
-Or-
If this drive is part of an array, then a powered-on
controller is not accessing the drive.
-Or-
The drive is configured as an online spare.
Off Off On OK to replace the drive online.
The drive has failed and has been placed off line.
Off On Off OK to replace the drive online if a predictive failure alert
is received, provided that the array is configured for fault
tolerance and all other drives in the array are online.
The drive is online and configured as part of an array.
On or
flashing
On Off Do not remove the drive. Removing a drive during this
process will cause data loss.
The drive is online and being accessed.