hp StorageWorks NAS e7000 v2 Maintenance and Service Guide

Connectors, LEDs, and Switches
94 NAS e7000 v2 Maintenance and Service Guide
Interlock Status
Improperly seated components in the interlock chain cause the LED associated with the fault
origination point to illuminate on the system board. Figure 65 and Table 20 identify the
location and status of each of the LEDs.
Note: Interlock components are required for the system to power up.
Note: NAS e7000 v2 servers are not equipped with chassis door or access panel interlocks.
Figure 65: Interlock LEDs
Table 19: QuickFind Diagnostic Display LEDs
Item Description Status
1Hot-plug fans
Amber = failure detected
Off = Normal
2Processors
3PPMs
4Memory
5 Non-hot-plug PCI-X
6Hot-plug PCI-X
7Interlock
8Therm trip
1 2 3 4 5