hp StorageWorks NAS e7000 v2 Maintenance and Service Guide

Removal and Replacement Procedures
80 NAS e7000 v2 Maintenance and Service Guide
Figure 57: Removing the power supply connectors
27. Use the Torx T-15 tool or a screwdriver to remove the four screws that secure the AC filter
cable assembly to the rear chassis wall (1).
28. Slide the assembly into the chassis, and then lift the assembly out of the chassis (2).
Figure 58: Removing the AC filters
Reverse steps 1 through 28 to replace the AC filter cable assembly.
1
3
3
2
2
1
1
2