hp StorageWorks NAS e7000 v2 Maintenance and Service Guide

Removal and Replacement Procedures
79NAS e7000 v2 Maintenance and Service Guide
Figure 55: Cutting the cable tie-wraps
23. Remove the seven cable clips:
a. Lift to disengage the cable clip (1).
b. Slide the clip forward, and lift it off the chassis (2).
Figure 56: Removing the cable clips
24. Use the Torx T-15 tool or screwdriver to remove the eight screws that secure the power
supply connectors to the chassis bottom (1).
25. Remove the cords from the connectors (2).
26. Remove the connectors from the server (3).
1
2
1