hp StorageWorks NAS e7000 v2 Maintenance and Service Guide

Removal and Replacement Procedures
55NAS e7000 v2 Maintenance and Service Guide
The operating system detects the PCI-X devices in the slots in this order:
6-5-4-3-2-1
For more information about PCI-X bus architecture and numbering, refer to the white paper,
PCI Bus Numbering in a Windows NT Environment, on the product website at
www.hp.com .
Hot-Plug Fans
Caution: Do not attempt to remove and replace a fan as a hot-plug procedure unless the
fan zone is redundant.
To remove a hot-plug fan:
1. Extend the server from the rack. Refer to “Extending the Server from the Rack” in this
chapter.
2. Open the rear access panel. Refer to “Opening and Removing the Rear Access Panel” in
this chapter.
3. Identify the failed fan by locating the fan with the amber LED.
4. Pull the tabs on the top of the fan (1).
5. Remove the fan from the server (2).
Table 13: Recommended PCI-X Expansion Slot Population Order
Slot Number Population Order Bus Sharing
61
Shared PCI-X bus 10
54
42
Shared PCI-X bus 6
35
23
Shared PCI-X bus 2
16