hp StorageWorks NAS e7000 v2 Maintenance and Service Guide

Removal and Replacement Procedures
53NAS e7000 v2 Maintenance and Service Guide
Caution: To prevent data loss, do not open an expansion slot latch when the power LED for
the slot is on.
Figure 27: PCI-X Hot Plug button
4. When the power LED for the slot is off, disconnect any cables connected to the selected
expansion board.
5. Press the PCI-X retaining clip until it locks in the open position, releasing one side of the
board.
Figure 28: Pressing the PCI-X retaining clip
6. Push the tab on the expansion slot latch (1).
1