hp StorageWorks NAS e7000 v2 Maintenance and Service Guide

Removal and Replacement Procedures
43NAS e7000 v2 Maintenance and Service Guide
Figure 18: Removing a memory board
Removing a DIMM
To remove a DIMM:
1. Remove the memory board. Refer to “Removing a Memory Board” in this chapter.
2. Place the memory board on a level, nonconductive surface.
3. Open the DIMM slot latches (1).
4. Remove the DIMM from the DIMM slot (2).
Figure 19: Removing a DIMM
2
3
1
4
2
3
1
2
1