hp StorageWorks NAS e7000 v2 Maintenance and Service Guide

Removal and Replacement Procedures
35NAS e7000 v2 Maintenance and Service Guide
Parts of the Memory Board
Use Figure 16 andTable 5 to identify the parts of the memory board.
Figure 16: Parts of the memory board
Memory Board LEDs and Icons
Use Figure 17 and Table 6 through Table 10 to identify icons and LEDs and their status on the
memory board. Each table represents the LEDs for a specific memory mode. Be sure you are
referring to the correct table for your specific mode.
Table 5: Parts of the Memory Board
Item Description
1 DIMM slot 1, bank A (populated)
2DIMM slot 2, bank A (populated)
3 DIMM slot 3, bank A (populated)
4 DIMM slot 4, bank A (populated)
5 DIMM slot 5, bank B
6 DIMM slot 6, bank B
7 DIMM slot 7, bank B
8 DIMM slot 8, bank B
9LEDs
10 Locking switch
11 Release latches
12 Ejector levers
1
3
2
1
4
3
6
5
8
7
9
10
11
12
9
11
12