hp StorageWorks NAS e7000 v2 Maintenance and Service Guide

Removal and Replacement Procedures
29NAS e7000 v2 Maintenance and Service Guide
Figure 10: Removing the front access panel
Replacing the Access Panels
To replace the access panels:
1. Place the front access panel on top of the server, and line up the guide marks on the front
access panel with the corresponding server guide marks.
2. With even pressure, push the front access panel down and slide it toward the front of the
server into the fitted slots.
Figure 11: Replacing the front access panel
3. Place the rear access panel on top of the server and line up the guide marks on the rear
access panel with the corresponding server guide marks.
1
2
3
3