hp StorageWorks NAS e7000 v2 Maintenance and Service Guide

Removal and Replacement Procedures
28 NAS e7000 v2 Maintenance and Service Guide
Figure 9: Removing the rear access panel
Removing the Front Access Panel
To remove the front access panel:
1. Extend or remove the server from the rack. Refer to “Extending the Server from the Rack”
in this chapter.
2. Remove the rear access panel. Refer to “Opening and Removing the Rear Access Panel”
in this chapter.
3. Remove the front access panel:
a. Press the release button located on the inside rear of the front access panel (1).
b. Slide the front access panel toward the rear of the server (2).
c. Remove the access panel (3).