hp StorageWorks NAS e7000 v2 Maintenance and Service Guide

Removal and Replacement Procedures
27NAS e7000 v2 Maintenance and Service Guide
Figure 7: Unlocking and sliding the rear access panel open
4. Slide the rear access panel toward the front of the server (1).
5. Push and hold the access panel release lever down (2) while sliding the rear access panel
forward about 2.54 cm (1 inch).
Note: The guide marks on the rear access panel and the server must line up before proceeding to
the next step.
Figure 8: Opening the rear access panel
6. Align the guide marks on the rear access panel and the chassis, and lift the rear access
panel from the server.
1
2
1
2