NAS b3000 v2 - Quick Start Guide (326190-002)

Beyond Initial Setup
63NAS b3000 v2 Quick Start Guide
Figure 19: Cluster Resources
The presence of two nodes (ENTAPP12 and ENTAPP 13 in Figure 19) shows
that a cluster exists and is in operation.
2. Right-click one of the groups and select the option Move. The group and all
its resources will be moved to the other node. After a short period of time the
cluster resources will be brought online on the second node. This shift is
visible on the screen. Close the Cluster Administrator snap-in.
3. If this test fails, the cluster configuration was not successful. Further
information can be found in the event logs and it may be necessary to reinstall
cluster services on one of the nodes.
Installation of Cluster service on both nodes is complete. The server cluster is
fully operational.