NAS b3000 v2 - Quick Start Guide (326190-002)

Beyond Initial Setup
61NAS b3000 v2 Quick Start Guide
16. Close the Add/Remove Programs window.
Validating the Cluster Installation
Use the Cluster Administrator snap-in to validate the Cluster service installation
on the first node.
1. Click Start.
2. Click Programs.
3. Click Administrative Tools.
4. Click Cluster Administrator.
Figure 18: Cluster administrator
If the snap-in window is similar to that shown in Figure 18, Cluster service was
successfully installed on the first node. It is now possible to install the Cluster
service on the second node.