NAS b3000 v2 - Quick Start Guide (326190-002)

Beyond Initial Setup
56 NAS b3000 v2 Quick Start Guide
Configuring Cluster Disks
Note: By default, all SCSI disks not residing on the same bus as the system disk will
appear in the Managed Disks list. Therefore, if the node has multiple SCSI buses, some
disks may be listed that are not to be used as shared storage (for example, an internal
SCSI drive.) Such disks should be removed from the Managed Disks list.
1. The Add or Remove Managed Disks dialog box shown in Figure 14
specifies which shared disks will be used by Cluster service. Add or remove
disks as necessary and then click Next.
Figure 14: Adding or removing managed disks
2. Click Next.