NAS b3000 v2 - Quick Start Guide (326190-002)

Before You Begin

35NAS b3000 v2 Quick Start Guide

Table 2: Configuration Information

Part A: To Be completed for DHCP and non-DHCP configurations

Server Host Name:

Integrated Lights-Out Name: Integrated

Lights-Out

Default User:

Integrated Lights-Out Password:

Note: If NIC teaming is to be implemented, determine which ports will be

teamed. Configure these Ethernet ports for DHCP protocol. For more information,

refer to the Ethernet teaming features and procedures section of administrative

procedures in the administration guide.

Part B: To be completed for non-DHCP configurations only

DNS Servers IP Address

NAS NIC Port* IP Address Subnet Mask Gateway

Address

Eth 0

Eth 1

Integrated Lights-Out Eth port

* The default NAS b3000 v2 has two Ethernet ports available for network

connectivity. Disable ports that will not be used. Each Ethernet port must be

configured with a separate subnet.

NOTE: Figure 6 and Table 3 in Chapter 3 illustrate the NIC Port assignments

mentioned here.

art C: SNMP Information (optional)

Trap Destination (IP Address)

Manager Client:

Management Traps

Community String:

System Management

Community String: