NAS b3000 v2 - Quick Start Guide (326190-002)

Product Overview
19NAS b3000 v2 Quick Start Guide
NAS b3000 v2 as a Single Device
In the single NAS device configuration, the NAS b3000 v2 is connected to the
storage enclosure via a single fiber channel host bus adapter (HBA) and an
external SAN switch or an embedded switch on the storage device. An MSA1000
is used in the illustration of Figure 1 as an example. If two HBAs are used on the
NAS b3000 v2, each HBA should be connected to a separate switch (embedded or
external) that has access to the same controller pairs. This connection method
allows redundant paths to the same storage subsystem.
Figure 1: NAS b3000 v2 as a single device
3
2
3
2
3
2