NAS b3000 - Connection

Connection Configurations
The following configurations are available to you with your
NAS B3000:
IMPORTANT Do not connect the storage enclosure until the SAN connection
wizard has completed.
N900 (non clustered)
654321
1. Connect the device to the external switches by attaching the
host bus adapter (HBA) to the designated switch port using a
fiber cable.
2. Connect the external switch to the storage enclosure using a
fiber cable.
N900 (non clustered)
654321
Connect the device to the I/O module on the storage enclosure
by attaching the HBA to the 2-GB Small Form Factor Pluggable
(SFP) Transceiver using a fiber cable.