NAS b2000 - Quick Start Guide

Configuration Setup
NAS B2000 Quick Start Guide 3-9
COMPAQ CONFIDENTIAL
Writer: Darrell Washington File Name: d-ch3 Configuration Setup.doc
Codename: Collins Part Number: 292283-001 Last Saved On: 5/30/02 9:40 AM
Direct Access Method (Using Hostname)
The NAS B2000 ships by default with DHCP enabled on the network port. If the
system is placed on a DHCP serviced network and the serial number of the device is
known, it can be accessed through a client running Microsoft Internet Explorer 5.5
(or later) on that network, using the 3201 port of the device. The serial number may
be found behind the front bezel of the NAS B2000, as illustrated in Figure 3-6.
D4059ABC3433
NAS B2000
COMPAQ
TM
Figure 3-6: Serial number location
Requirements
The following items are required to run the WebUI configuration application:
• Windows-based PC loaded with Internet Explorer 5.5 (or later) on the same
segment as the NAS B2000
• DHCP-serviced network
• Serial number of the NAS B2000
NOTE: The NAS B2000 is designed to be deployed without a monitor, keyboard, and mouse.
These ports are available and supported by the NAS device, if used.