HP StorageWorks SAN Switch Rack Mount Kit Installation Instructions (AV-RU6YD-TE, September 2004)

7SAN Switch Rack Mount Kit Installation Instructions
Caution: For proper air flow, the SFP media side of the device must face the
rear of the rack. This mounting allows air to enter from the front of the rack and
to exhaust at the rear of the rack, similar to other rack-mounted equipment.
This prevents overheating, which may cause it to fail.
(14) 8-32 x 5/16-inch Phillips pan-head
SEMS screws for use with the MP Router, SAN
Switch 2/8, SAN Switch 2/8V,
SAN Switch 2/16, SAN Switch 2/16V and
SAN Switch 2/16N.
(10) #10-32 x 1/2-inch Phillips pan-head
screws with captive star lock washer
(8) #10 alignment washers
(8) #10 adapter washers
(2) 1/4-20 hex nuts with captive star lock
washers
(2) 1/4-inch flat washers
Table 1: Rack Mount Kit Rails and Rail Mounting Hardware (Continued)
Item Description