Brocade Access Gateway Administrator's Guide (53-1000605-01, October 2007)
Access Gateway Administrator’s Guide 47
53-1000605-01
ag
D
Examples
To display Access Gateway information:
switch:admin> ag --show
Name : ST3
NodeName : 10:00:08:00:88:35:a0:12
Number of Ports : 16
IP Address(es) : 192.115.74.55
Firmware Version : v6.0.0v6.0.0_pit_070704_070
N_Ports : 7
F_Ports : 7
Policies enabled : pg
Port Group information :
PG_ID PG_Name
PG_Members
-----------------------------------------------------------------------------
0 pg0 4;5;7;8;10
1 pg1 11;15
----------------------------------------------------------------------------
Fabric Information :
Attached Fabric Name N_Ports
---------------------------------------------
10:00:00:05:1e:34:15:c6 4
10:00:00:05:1e:36:1e:ea 5;7;10;11
10:00:00:05:1e:34:27:d0 8;15
---------------------------------------------
N_Port information :
Port PortID Attached PWWN FO FB IP_Addr F_Ports
---------------------------------------------------------------------
4 0x060200 20:02:00:05:1e:34:15:c6 1 1 10.115.74.59
0;1;2;12;14;
5 0x019800 20:98:00:05:1e:36:1e:ea 1 1 10.115.74.200 None
7 0x019a00 20:9a:00:05:1e:36:1e:ea 1 1 10.115.74.200 None
8 0x030600 20:06:00:05:1e:34:27:d0 1 1 10.115.74.58 None
10 0x019900 20:99:00:05:1e:36:1e:ea 1 1 10.115.74.200 None
11 0x019500 20:95:00:05:1e:36:1e:ea 1 1 10.115.74.200 3;
15 0x030301 20:03:00:05:1e:34:27:d0 1 1 10.115.74.58 6;
---------------------------------------------------------------------
F_Port information :
Port PortID Attached PWWN N_Port Preferred N_Port
-------------------------------------------------------------------
0 0x060204 10:00:00:00:c9:3f:7d:4a 4 8
1 0x060202 10:00:00:00:c9:3f:7d:04 4 None
2 0x060205 10:00:00:00:00:02:00:00 4 None
3 0x019501 10:00:00:00:c9:3f:7d:05 11 15
6 0x030302 10:00:00:00:00:01:00:00 15 11
12 0x060201 10:00:00:00:00:05:00:00 4 10
14 0x060203 10:00:00:00:00:06:00:00 4 10
-----------------------------------------------------------------------------
NOTE
An Access Gateway attached to a McDATA switch in McDATA Fabric Mode will not be displayed
in the agshow output on the Brocade switches.