HP StorageWorks XPath OS 7.4.X System Error Messages Reference Guide (AA-RVHGC-TE, September 2005)

90 Error messages
FCR-ISW
Message
Probable cause
Resources for saving a copy of an ELS (extended link services) command are not available. This problem is
usually transient, and might not require user action. The message acronyms are:
• dfid: Destination fabric ID
• sfid: Source fabric ID
• did: Destination device ID
• sid: Source device ID
• ox_id: Exchange ID
Recommended action
ELS commands that cross the router and need modifications cannot be handled at the moment. Hosts
usually retry the operations and recover. If the host (sid) is not able to discover all targets across the FCR,
disable and re-enable the port where the host is connected in the edge fabric to force a rediscover
operation from the host.
Severity
Warning
FCR-WKA
Message
Probable cause
The connection to the xbar frame queue failed. The xbar is the kernel module that sends and receives
information on ports. The xbar frame queue handles all Fibre Channel well-known address frames, such as
0xFFFFFE, 0xFFFFFD, and 0xFFFCxx.
Recommended action
Reboot the switch.
Severity
Error
process_id (iswitchd): date time
Warning FCR-ISW, 3, Ran out of trapped ELS slots dfid dfid sfid sfid did did sid
sid ox_id ox_id
process_id (iswitchd): date time
Error FCR-WKA, 2, isw: could not open xbar frame Q queue