HP StorageWorks XPath OS 7.4.X System Error Messages Reference Guide (AA-RVHGC-TE, September 2005)

XPath OS 7.4.x system error messages reference guide 49
Recommended action
Increase the threshold of the partition or clean up the partition by removing temporary files.
There is no specific command to change the threshold.
1. Use the configUpload command to upload the switch configuration.
2. Change the threshold value.
3. Use the configDownload command to download the file to the switch.
CAUTION: These actions require a root login; contact your switch support supplier before performing
these actions.
Log in as root and use the rm command to delete temporary files. For example, within the root directory
(/), use the following commands:
rm /tmp/*
rm /usr/cores/*
Severity
Error
CM-EVENT_ISCSI_AUTHENTICATION_FAILED
Message
Probable cause
An iSCSI initiator did not specify the right password.
Recommended action
Check the passwords for both the initiator and the target using the iscsiAuthCfg command.
Severity
Error
CM-EVENT_ISCSI_DB_CHANGE
Message
Probable cause
A configuration change occurred for the WWN or Challenge-Handshake Authentication Protocol (CHAP)
pools, or a merge process occurred between the primary and secondary iSCSI switches.
Recommended action
No action is required.
Severity
Info
process_id (EvtMgr): date time
Error CM-EVENT_ISCSI_AUTHENTICATION_FAILED, 2, iSCSI authentication failed
process_id (EvtMgr): date time
Info CM-EVENT_ISCSI_DB_CHANGE, 4, iSCSI db change: wwn or chap