HP StorageWorks XPath OS 7.4.X System Error Messages Reference Guide (AA-RVHGC-TE, September 2005)

XPath OS 7.4.x system error messages reference guide 123
WKA, Debug, dest_q_calc
Port Log message
Probable cause
This message specifies an attempt to classify an incoming frame with 0 payload length, based on the
command type.
Recommended action
No action is required.
Severity
Info
WKA, Debug, destq calc failed
Port Log message
Probable cause
The Fabric OS was unable to find a matching recipient for an incoming frame. The output displays an
integer dump of:
• The first six words from the FC header.
• From one to six words from the payload. The payload line is present only if a payload exists.
Recommended action
No action is required.
Severity
Info
WKA, Debug, fill hdr failed
Port Log message
Probable cause
A frame to be transmitted was dropped due to lack of routes to the destination domain. This situation can
happen transiently during fabric reformation and route recalculation. The output displays an integer dump
of:
• The first six words from the internal routing header.
• The first six words from the FC header.
• From one to six words from the payload. The payload line is present only if a payload exists.
time WKA Debug port len dest_q_calc: 0 pl_len!
time WKA Debug port len destq calc failed 6words_FCheader 6words_payload
time WKA Debug port len fill hdr failed 6words_irh 6words_FCheader 6words_payload