HP StorageWorks XPath OS 7.4.X System Error Messages Reference Guide (AA-RVHGC-TE, September 2005)

118 Error messages
fabctl, Debug, WAN_TOV=, Max_hop=
Port Log message
Probable cause
This message provides the WAN_TOV (wide area network time out value) and Max_hop count settings.
See the configure command in the HP StorageWorks XPath OS 7.4.x command reference guide for
more information these settings.
Recommended action
No action is required.
Severity
Info
fabctl, nbr_sm
Port Log message
Probable cause
This message provides the state transition in the FSPF neighbor state machine. The possible states are:
• Unknown
• Down
• Init
• DBExch
• DBAckWait
• DBWait
• Full
Recommended action
No action is required.
Severity
Info
fabctl, prtSCN, st= Topo= Spd=
Port Log message
Probable cause
This message provides the port state change; the port either came online or went offline. The log entry
displays the new port status (ONLINE/OFFLINE), Topology (P2P/LOOP), and link Speed (1G/2G).
time fabctl Debug port len WAN_TOV=xx, Max_hop=xx
time fabctl nbr_sm port len state to state
time fabctl prtSCN port len st=port_status, Topo=topo, Spd=speed_value