HP StorageWorks XPath OS 7.4.X System Error Messages Reference Guide (AA-RVHGC-TE, September 2005)

XPath OS 7.4.x system error messages reference guide 107
ZONE-ZSD_ZONE
Message
Probable cause
The maximum number of zones (1024) has been exceeded.
Recommended action
Delete excess zones and retry the last commit operation.
Severity
Warning
Port log messages
This section documents all messages displayed by the portLogShow command.
The XPath OS maintains an internal port log of all port activity. Port log captures the control messages that
traverse the central processor and does not log any data traffic that gets switched at the port level. The port
log stores entries for each port as a circular buffer. Each port has space to store 2,048 log entries. Once
the log is full, the newest log entries overwrite the oldest ones. Port Logs are not persistent and are lost over
power-cycles and reboots.
Port log management
Use the commands in Table 9 to view and manage port logs.
See the HP StorageWorks XPath OS 7.4.x command reference guide for detailed information on these
commands.
process_id (zsd): date time
Warning ZONE-ZSD_ZONE, 3, The num of zones exceeds 1024
Table 9 Commands for port log management
Command Description
portLogClear Clears all port logs or particular ports.
portLogDisable Disables port logs for all or particular ports.
portLogDump Displays port logs for all or particular ports without page breaks.
portLogEnable Enables port logs for all or particular ports.
portLogShow Displays port logs for all or particular ports with page breaks.