HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

XPath OS 7.4.x command reference guide 99
Displays MP Router physical device information.
Synopsis
fcrphydevshow [-a all] [-f fabricid] [-w wwn]
Availability
all users
Description
This command displays the physical (real) devices that are configured to be exported to other fabrics. A
device is considered to be configured to be exported to another fabric if it is a member of a Logical
Storage Area Network (LSAN) zone. The device is displayed only if it is discovered in the EX_Port-attached
fabric’s Name Server (for example, the device is online).
Physical device information is available only for physical devices that exist in fabrics attached to EX_Ports
of MP Routers on the same backbone fabric as this MP Router.
The default output displays only physical device information relevant to this MP Router. Relevant physical
devices include physical devices that are configured to be exported from fabrics attached to this MP
Router’s EX_Ports.
The physical devices are listed by fabric. Search for physical devices based on a fabric ID and port world
wide name with the -f and -w operands, respectively. The message No device found appears if there
is no physical device information available at this MP Router.
The output displays the following columns:
Operands
This command has the following optional operands:
fcrPhyDevShow
Device Exists in
Fabric
The fabric where the physical device exists.
WWN The WWN of the device port.
Physical PID The port ID of the real/physical device. (This port ID is relevant
only on the fabric specified by the Device Exists in
Fabric column.)
-a all Displays all physical devices for all MP Routers in the same
backbone fabric, whether or not they are relevant to this MP
Router.
-f fabricid Displays the physical devices in the specified fabric.
-w wwn Displays the physical devices with the specified port WWN.