HP StorageWorks XPath OS 7.4.X Command Reference Guide (AA-RVHCC-TE, September 2005)

XPath OS 7.4.x command reference guide 97
Displays MP Routers in a backbone fabric.
Synopsis
fcrfabricshow
Availability
all users
Description
This command displays the MP Routers that exist in an MP Router backbone fabric and displays
information about these MP Routers.
If there are no active MP Routers present in the backbone fabric, a message is displayed that says that no
active MP Routers have been found. An active MP Router is an MP Router with at least one enabled
EX_Port.
The following output is displayed for each MP Router in the backbone fabric:
Operands
none
Examples
To display the MP Routers in the backbone fabric:
fcrFabricShow
WWN The WWN of the MP Router.
Domain ID The domain ID of the MP Router. This domain ID is relevant only in the
backbone fabric.
Info The Ethernet IP address and name of the MP Router
EX_Ports The following information is displayed for each MP Router's active EX_Ports:
EX_Port The port number for the EX_Port
FID The fabric ID of the EX_Port
Neighbor Switch
Info (WWN, enet
IP, name)
The WWN, the Ethernet IP address and switch
name of the switch attached to the EX_Port.
fcr_mars_8:admin> fcrfabricshow
FCR WWN: 10:00:00:05:1e:13:59:00, Dom ID: 2, Info: 10.32.156.52, "fcr_mars_9"
EX_Port FID Neighbor Switch Info (WWN, enet IP, name)
------------------------------------------------------------------------
7 10 00:00:00:00:00:00:00:00, 10.32.156.33, "mojo_10"
4 116 00:00:00:00:00:00:00:00, 10.32.156.34, "mojo_11"
5 116 00:00:00:00:00:00:00:00, 10.32.156.34, "mojo_11"
(continued on next page)